Earines — safe listening and noise exposure | earines.com

Earines — safe listening and noise exposure | earines.com

Measuring sound level and dose

NIOSH recommends A frequency weighting and Slow response for its sound level meter workflow, and defines a noise dose of 100% or more as exceeding the allowable daily occupational exposure.

Sound level meters report dB, and the weighting and response settings change what the number means. NIOSH recommends A frequency weighting and Slow response for its occupational workflow. A-weighted decibels, written dBA, adjust the reading to approximate how human hearing responds.

Dose combines level and time into one percentage. Under NIOSH, a dose of 100% or more exceeds the allowable daily occupational exposure. That daily measure is not the same as WHO's weekly listening allowance.

The signature mark of this site, drawn as a plate

On narrow screens, swipe or scroll the plate sideways.

Phone sound-level apps can give a rough orientation, but they are not calibrated instruments. Treat phone readings as approximate and use a calibrated meter when a decision depends on the number.

Measurement distance and environment also matter. A reading taken close to a source will differ from one taken across a room, and reflective surfaces can raise the level. Note these conditions alongside the number.

The NIOSH framework uses a 3 dB exchange rate. Each 3 dB increase halves the allowable exposure time. WHO uses a different presentation. Its table pairs sound levels with weekly times.

  • Check the frequency weighting: A weighting is the NIOSH recommendation.
  • Check the response: Slow response is the NIOSH recommendation.
  • Note the measurement distance and the environment.
  • For dose, compare the result with the 100% daily occupational threshold.
  • Treat phone app readings as approximate.

Further reading